EN
worldpeak-7-8-pre-terminated-cable-assembly, worldpeak-7-8-pre-terminated-cable-assembly, /coaxial-cable-assembly
EN
EN
After-Sales Advantage: Custom phase-matched sets and dedicated engineering support.
Material & Craftsmanship: Heavy-duty 22.0mm corrugated feeder with precision-machined interfaces.
Target Scenario & Audience: Cellular base-station installers and telecom network engineers.
Worldpeak 7/8 Pre-Terminated Cable Assembly is engineered to support high-performance cellular base-station main feeders and robust trunk connections. Utilizing a resilient 22.0mm outer diameter corrugated feeder, Worldpeak 7/8 Pre-Terminated Cable Assembly delivers exceptional signal integrity from DC up to millimeter-wave frequencies. Every single Worldpeak 7/8 Pre-Terminated Cable Assembly is built on calibrated termination stations and undergoes strict Vector Network Analyzer verification. Shipped with dedicated test data reports, Worldpeak 7/8 Pre-Terminated Cable Assembly guarantees reliable insertion loss and optimized performance for modern telecommunication infrastructures.
In contemporary telecommunication network deployments, infrastructure reliability and signal fidelity remain paramount. Worldpeak provides advanced RF connectivity solutions tailored for cellular base-stations, distributed antenna systems, and industrial communication links. The flagship Worldpeak 7/8 Pre-Terminated Cable Assembly combines a heavy-duty 22.0mm outer diameter corrugated feeder with precision-machined RF connector interfaces, creating a unified transmission line designed for rigorous outdoor and indoor installations.
Unlike traditional coaxial cables that require complex on-site preparation, Worldpeak 7/8 Pre-Terminated Cable Assembly arrives factory-built under controlled manufacturing conditions. Each Worldpeak 7/8 Pre-Terminated Cable Assembly integrates high-grade copper or copper-clad aluminum outer conductors and foam dielectric cores to minimize attenuation and resist environmental stress. Telecommunication operators and system integrators choose Worldpeak 7/8 Pre-Terminated Cable Assembly to streamline installation timelines while maintaining strict adherence to electrical specifications across complex network topologies.
Worldpeak 7/8 Pre-Terminated Cable Assembly supports a comprehensive selection of connector combinations, allowing seamless integration with legacy and modern RF equipment.
7/16 DIN Male / Female: Built with a large threaded interface designed for high-power base-station and broadcast networks operating up to 7.5 GHz. Flange-mount options serve tower-mounted amplifiers and combiners.
N-Type Male / Female: Weather-resistant threaded connectors engineered for outdoor antenna arrays and base-station ports up to 11 GHz.
4.3-10 Male / Female: Compact low-PIM connectors specifically developed for modern small-cell deployments and indoor distributed antenna systems up to 6 GHz.
UHF (PL-259 / SO-239): Traditional screw-on interfaces utilized in HF/VHF amateur radio systems and legacy equipment operating up to 300 MHz.
TNC & BNC Variants: Threaded TNC and bayonet BNC interfaces designed for vibration-prone environments, test instruments, and laboratory interconnects up to 11 GHz and 4 GHz respectively.
The versatility of Worldpeak 7/8 Pre-Terminated Cable Assembly ensures that engineers can configure custom jumper solutions without relying on signal-degrading RF adapters.
Cable Type: 7/8-inch corrugated coaxial feeder cable
Outer Diameter (OD): 22.0 mm nominal
Impedance: 50 Ohms nominal
Operating Frequency Range: DC up to 11 GHz (depending on selected connector family)
Testing Standard: 100% Vector Network Analyzer (VNA) tested for Insertion Loss and Voltage Standing Wave Ratio
Length Tolerance: ±2 mm for assemblies under 1 meter; ±0.2% for assemblies exceeding 1 meter
Customization Options: Phase-matched sets, serial-numbered labeling, and specialized protective jacketing
Deploying Worldpeak 7/8 Pre-Terminated Cable Assembly offers significant advantages over conventional field-terminated solutions. Factory pre-termination eliminates variables introduced by manual stripping, hand-crimping, and uneven torque application on remote communication towers.
VNA Verification: Every Worldpeak 7/8 Pre-Terminated Cable Assembly undergoes rigorous vector network analysis. Technicians review return loss and VSWR curves to confirm compliance before packaging, ensuring that Worldpeak 7/8 Pre-Terminated Cable Assembly performs reliably in the field.
Low Intermodulation Performance: By utilizing precision-machined connector bodies and automated assembly equipment, Worldpeak 7/8 Pre-Terminated Cable Assembly minimizes passive intermodulation distortion, protecting sensitive cellular receivers from signal degradation.
Mechanical Durability: The rugged construction of Worldpeak 7/8 Pre-Terminated Cable Assembly resists moisture ingress, UV radiation exposure, and mechanical tension experienced during vertical tower installation.
Worldpeak 7/8 Pre-Terminated Cable Assembly serves diverse telecommunication and industrial environments where signal loss must be strictly minimized:
Cellular Base-Station Trunk Lines: Serving as the main feeder connecting ground-level base transceiver stations to masthead antennas.
Test & Measurement Interconnects: Providing stable, VNA-verified electrical paths for laboratory testing and calibration setups.
Mixed-Interface System Integration: Utilizing multi-interface configurations within Worldpeak 7/8 Pre-Terminated Cable Assembly to link dissimilar port geometries without introducing extra mechanical adapters.
Distributed Antenna Systems (DAS): Connecting remote radio units to passive antenna arrays in large commercial buildings and transport hubs.
Q: How do I choose between 7/16 DIN Male and N-Type Male connector options?
A: Select 7/16 DIN Male for high-power macro base-station environments requiring high power-handling capacity. Choose N-Type Male for standard outdoor antenna ports and equipment operating up to 11 GHz where space or specific port geometry dictates its use.
Q: What is included with each shipment of Worldpeak 7/8 Pre-Terminated Cable Assembly?
A: Every shipment of Worldpeak 7/8 Pre-Terminated Cable Assembly includes the custom-built cable assembly along with a dedicated printed or digital VNA test data report verifying individual performance metrics.
Q: What standard production lead times apply for custom configurations?
A: Standard configurations of Worldpeak 7/8 Pre-Terminated Cable Assembly typically ship within 5 to 10 working days. Bulk orders or specialized non-stock connector families may require 2 to 4 weeks.
Q: Can Worldpeak 7/8 Pre-Terminated Cable Assembly be manufactured in phase-matched sets?
A: Yes, Worldpeak offers phase-matched manufacturing for multi-antenna MIMO systems, providing documentation of electrical length data alongside serial-numbered identification labels.
Q: What installation guidelines should technicians follow?
A: Installers should utilize calibrated torque wrenches appropriate for each connector series, respect the minimum bend radius specified for the 22mm corrugated feeder, and keep protective caps on unused interfaces until immediate mating.
