EN
worldpeak-lmr-195-pre-terminated-cable-assembly, worldpeak-lmr-195-pre-terminated-cable-assembly, /coaxial-cable-assembly
EN
EN
100% VNA tested with individual verification reports
4.95 mm low loss coaxial design with high shielding efficiency
Engineered for Wi-Fi access points, base stations, and RF laboratories
Guaranteed precise electrical integrity and low VSWR performance
The Worldpeak LMR 195 pre-terminated cable assembly produced by Zhenjiang Worldpeak Communication Co., Ltd. provides high-reliability 50Ω RF signal transmission across wireless communication networks and measurement environments. Featuring a flexible 4.95 mm outer diameter, this low loss coaxial cable assembly supports eight standard interface series, including SMA, N-Type, BNC, TNC, SMP, 2.92mm, MCX, and QMA connectors. Every pre-terminated RF cable assembly is manufactured on calibrated tooling and thoroughly inspected. Accompanied by test data documentation, this VNA tested RF jumper ensures repeatable performance and low VSWR for Wi-Fi access points, base stations, and RF laboratory interconnects.
Zhenjiang Worldpeak Communication Co., Ltd. engineered the Worldpeak LMR 195 pre-terminated cable assembly to solve critical signal routing challenges in compact space constraints. Utilizing a high-performance 4.95 mm outer diameter low loss coaxial cable assembly structure, this solution connects high-frequency RF equipment while keeping signal attenuation minimal across DC to millimeter-wave frequency bands.
Selecting a factory pre-terminated RF cable assembly avoids the assembly inconsistencies common with field-installed connectors. Zhenjiang Worldpeak Communication Co., Ltd. applies precise automated stripping, controlled crimping procedures, and rigorous quality inspection on every LMR 195 cable assembly. By providing direct mixed-interface connector options, Zhenjiang Worldpeak Communication Co., Ltd. eliminates unnecessary intermediate adapters, thereby reducing system reflection, saving installation space, and protecting overall link budget integrity across industrial wireless installations.
Multi-Interface Flexibility: Compatible with 8 connector families (SMA, N-Type, BNC, TNC, SMP, 2.92mm, MCX, QMA) in male and female genders.
Factory VNA Inspection: Each pre-terminated RF cable assembly undergoes individual VNA testing to document exact insertion loss and return loss values.
Compact Outer Diameter: The 4.95 mm outer cable diameter allows tight bend radii in dense racks and small equipment enclosures.
High Shielding Efficiency: Double-shielded cable design suppresses electromagnetic interference (EMI) to preserve signal clarity.
Tailored Manufacturing: Available in standard or custom lengths with tight length tolerances to fit precise hardware layouts.
Ensuring dependable high-frequency transmission demands tight manufacturing tolerances. Zhenjiang Worldpeak Communication Co., Ltd. builds each LMR 195 cable assembly on calibrated stripping and crimping equipment, preventing inner conductor displacement and dielectric damage.
While field termination often yields variable impedance and unverified electrical performance, a factory pre-terminated RF cable assembly from Zhenjiang Worldpeak Communication Co., Ltd. is evaluated on calibrated Vector Network Analyzers. This process produces individual test reports detailing VSWR and insertion loss for every unit.
Furthermore, for phased-array radar, multi-channel test fixtures, and cellular antenna systems, Zhenjiang Worldpeak Communication Co., Ltd. offers phase-matched LMR 195 cable assembly sets. These customized sets maintain uniform phase behavior and controlled electrical length, mitigating phase mismatch in sensitive microwave systems up to 40 GHz.
Characteristic Impedance: 50 Ohms
Cable Outer Diameter: 4.95 mm
Frequency Range: DC up to 40 GHz (Connector dependent)
Connector Options & Ratings:
SMA (Male / Female): Threaded interface rated to 18 GHz for high-density PCB modules.
N-Type (Male / Female): Weather-resistant threaded interface rated to 11 GHz for outdoor base stations.
BNC (Male / Female): Bayonet quick-connect rated to 4 GHz for laboratory instrumentation.
TNC (Male / Female): Threaded vibration-resistant interface rated to 11 GHz for vehicular systems.
SMP (Male / Female): Push-on blind-mate interface rated to 40 GHz for high-density board-to-board connections.
2.92mm / K (Male / Female): Precision threaded interface rated to 40 GHz for millimeter-wave metrology.
MCX (Male / Female): Miniature snap-on connector rated to 6 GHz for compact IoT modules.
QMA (Male / Female): Quick-snap SMA alternative rated for rapid cellular DAS deployment.
Length Tolerance: Standard ±2 mm for assemblies ≤ 1 m; ±0.2% for assemblies > 1 m.
Test & Measurement Systems: SMA and 2.92mm VNA tested RF jumper assemblies deliver verified insertion loss for precise lab calibration.
Base Station & Antenna Connections: Outdoor N-Type and TNC low loss coaxial cable assembly options connect base station units, surge protectors, and antennas.
Direct Interface Conversion: Interconnects mismatched equipment interfaces directly (e.g., SMA Male to BNC Male), eliminating adapters.
In-Building Wireless & DAS: QMA and N-Type pre-terminated RF cable assembly units streamline ceiling-mount antenna installations.
Aerospace & Mobile Racks: TNC and SMP LMR 195 cable assembly items provide secure connections under high-vibration conditions.
Utilizing factory-assembled LMR 195 cable assembly products from Zhenjiang Worldpeak Communication Co., Ltd. enhances operational efficiency for system integrators. Replacing field assembly with pre-terminated solutions reduces labor costs, eliminates specialized field tooling needs, and prevents expensive downtime caused by field crimping failures.
Zhenjiang Worldpeak Communication Co., Ltd. enforces strict quality assurance protocols, ensuring every low loss coaxial cable assembly arrives ready for immediate deployment. Standard orders ship within 5 to 10 working days, while non-stock connectors take 2 to 4 weeks. Custom serialization, phase-matched pairing, and dedicated VNA test reports provide key advantages for original equipment manufacturers (OEMs).
Q: How do I choose between SMA Male and N-Type Male on an LMR 195 cable assembly?
A: SMA Male provides a compact threaded interface for high-density internal equipment up to 18 GHz. N-Type Male offers a robust, weather-resistant connector for outdoor antennas up to 11 GHz. Select based on frequency, enclosure limitations, and matching port configurations.
Q: What length tolerance can Zhenjiang Worldpeak Communication Co., Ltd. provide?
A: The standard tolerance is ±2 mm for assemblies under 1 meter and ±0.2% for longer lengths. Special tolerances can be produced for phase-critical applications.
Q: What is the standard lead time for a pre-terminated RF cable assembly?
A: Standard configurations ship in 5–10 working days. Orders involving specialized connectors or large quantities require 2–4 weeks.
Q: What precautions should be taken during low loss coaxial cable assembly installation?
A: Apply a torque wrench matched to the connector series, maintain the minimum cable bend radius, keep protective caps on unused ports, and inspect contact faces for dirt prior to mating.
Q: Does Zhenjiang Worldpeak Communication Co., Ltd. supply phase-matched assemblies?
A: Yes, phase-matched LMR 195 cable assembly sets with individual VNA test reports and customized identification labels are available upon request.
Q: What information is needed for a VNA tested RF jumper quote request?
A: Include cable type (LMR 195), connector series and gender for both ends, overall length, quantity, and specific custom requirements such as phase matching.
