EN
worldpeak-lmr-400-pre-terminated-cable-assembly, worldpeak-lmr-400-pre-terminated-cable-assembly, /coaxial-cable-assembly
EN
EN
100% VNA tested with individual verification reports
10.3 mm low-loss coaxial construction for base-station and tower runs
Engineered for wireless communication systems, cellular DAS, and RF test setups
Guaranteed superior signal integrity and long-term network reliability
Zhenjiang Worldpeak Communication Co., Ltd. provides high-performance LMR 400 pre-terminated cable assembly solutions engineered for exceptional signal integrity and low-loss performance in demanding radio frequency environments. Featuring a robust 10.3 mm outer diameter low-loss coaxial cable, each LMR 400 pre-terminated cable assembly is factory-built on calibrated production lines and rigorously verified through vector network analyzer (VNA) testing. Designed for base-station jumpers, wireless communication systems, and professional RF test setups, Zhenjiang Worldpeak Communication Co., Ltd. delivers customizable connector combinations to meet precise engineering specifications across global markets.
The LMR 400 pre-terminated cable assembly represents an engineering-grade interconnect solution tailored for modern wireless infrastructure, cellular repeaters, and telecommunication networks. Built around a 10.3 mm outer diameter low-loss cable architecture, this assembly minimizes signal attenuation over extended runs, making it an ideal choice for connecting base-station equipment, tower-mounted amplifiers, and outdoor antennas.
Zhenjiang Worldpeak Communication Co., Ltd. manufactures each LMR 400 pre-terminated cable assembly using advanced termination techniques. By utilizing precision-calibrated stripping and crimping equipment, Zhenjiang Worldpeak Communication Co., Ltd. ensures that mechanical stress on the dielectric and conductor is minimized. Every individual LMR 400 pre-terminated cable assembly undergoes 100% vector network analyzer testing to verify electrical parameters such as return loss, insertion loss, and voltage standing wave ratio (VSWR). Comprehensive test documentation accompanies shipments, ensuring transparency and reliability for network operators and system integrators.
Zhenjiang Worldpeak Communication Co., Ltd. supports an extensive range of interface configurations for the LMR 400 pre-terminated cable assembly, accommodating diverse installation requirements:
N-Type Male / Female: Weather-resistant threaded connectors designed for robust outdoor antenna and base-station connections supporting frequencies up to 11 GHz, with flange and panel-mount options available for surge arrestors.
BNC Male / Female: Quick-connect bayonet and panel-mount interfaces optimized for laboratory test equipment, signal generators, and video systems operating up to 4 GHz.
TNC Male / Female: Threaded BNC variants engineered for vibration-prone industrial and vehicular environments, rated up to 11 GHz with bulkhead feedthrough options.
SMA Male / Female: Compact threaded interfaces suitable for high-density RF modules, PCB connections, and test panels supporting frequencies up to 18 GHz.
UHF (PL-259 / SO-239): Traditional screw-on and chassis-mount connectors tailored for HF/VHF amateur radio equipment and legacy systems up to 300 MHz.
QMA Male / Female: Snap-on alternatives to standard SMA interfaces, facilitating rapid deployment in cellular distributed antenna systems (DAS) and in-building wireless networks.
4.3-10 Male / Female: Compact, low-PIM interface designs built for modern small-cell sites, remote radio units, and multi-operator DAS deployments up to 6 GHz.
Cable Type: LMR 400 Low-Loss Coaxial Cable
Outer Diameter (OD): 10.3 mm
Impedance: 50 Ohms
Frequency Range: DC to 18 GHz (dependent on selected connector interface)
Testing Standard: 100% Vector Network Analyzer (VNA) Verified
Length Tolerance: ±2 mm for assemblies under 1 meter; ±0.2% for longer custom lengths
Production Lead Time: 5-10 working days for standard configurations; 2-4 weeks for bulk orders or specialized interfaces
Deploying an LMR 400 pre-terminated cable assembly from Zhenjiang Worldpeak Communication Co., Ltd. offers distinct engineering advantages over manual field termination. Field termination requires specialized stripping tools, precise hand-crimping techniques, and highly skilled technicians, yet often lacks verifiable electrical testing prior to commissioning. In contrast, factory-built assemblies by Zhenjiang Worldpeak Communication Co., Ltd. are fabricated in controlled environments. This ensures consistent insertion loss profiles, optimized VSWR characteristics, and mechanical durability that manual assembly cannot reliably replicate. Each factory-tested LMR 400 pre-terminated cable assembly reduces on-site installation time and eliminates signal degradation risks associated with improper field installation.
Base-Station and Tower Connections: Deploying an LMR 400 pre-terminated cable assembly between tower-mounted amplifiers and base-station transceivers to minimize feedline loss.
Test and Measurement Interconnects: Utilizing VNA-verified N-Type or BNC configurations for repeatable, high-accuracy laboratory measurements.
Cellular Distributed Antenna Systems (DAS): Integrating low-PIM 4.3-10 or QMA interfaces for in-building wireless coverage and small-cell signal distribution.
Mixed-Interface RF Systems: Connecting disparate equipment ports directly using custom hybrid configurations, such as N-Type Male to TNC Male jumpers, eliminating the need for loss-inducing external adapters.
Integrating solutions from Zhenjiang Worldpeak Communication Co., Ltd. provides substantial economic and operational value for telecom operators, system integrators, and equipment manufacturers. By standardizing on factory-certified components, projects experience decreased deployment timelines and reduced labor costs associated with on-site cable preparation. The inclusion of individual VNA test reports from Zhenjiang Worldpeak Communication Co., Ltd. streamlines quality assurance audits, minimizes signal troubleshooting overhead, and enhances the operational longevity of wireless communication networks. Furthermore, flexible customization options allow procurement teams to source exact lengths and interface pairings, optimizing inventory utilization across commercial projects.
Q: How do I choose between N-Type Male and BNC Male for my project?
A: N-Type Male provides a weather-resistant threaded connection ideal for outdoor antennas and high-frequency base stations. BNC Male utilizes a quick-connect bayonet mechanism well-suited for laboratory test equipment and indoor RF interconnects. Selection should be based on your operating frequency band, environmental exposure, and equipment port compatibility.
Q: What is the standard length tolerance on custom assemblies from Zhenjiang Worldpeak Communication Co., Ltd.?
A: Standard length tolerance is maintained at ±2 mm for assemblies under 1 meter and ±0.2% for longer custom runs. Tighter electrical length tolerances and phase-matched sets can be requested for specialized RF applications.
Q: What is the typical production lead time for orders?
A: Standard-configuration orders processed by Zhenjiang Worldpeak Communication Co., Ltd. typically ship within 5 to 10 working days. Large production volumes or non-standard connector configurations may require 2 to 4 weeks.
Q: What installation precautions should be observed when deploying the cable?
A: Always use a calibrated torque wrench specified for the respective connector series. Ensure the cable is installed respecting its minimum bend radius to prevent internal conductor damage. Keep protective dust caps on connectors until final mating and inspect interfaces for debris prior to installation.
Q: Are phase-matched sets and custom serialization available?
A: Yes. Zhenjiang Worldpeak Communication Co., Ltd. offers phase-matched assembly sets complete with electrical length data, serial-numbered barcode labels, and individual VNA documentation as standard options for OEM clients.
Q: What details must be provided when requesting a formal quotation?
A: To receive an accurate quotation from Zhenjiang Worldpeak Communication Co., Ltd., specify the cable type, desired connector series and gender for both ends, total assembly length, order quantity, and any special testing or phase-matching requirements.
