EN
worldpeak-rg213-pre-terminated-cable-assembly, worldpeak-rg213-pre-terminated-cable-assembly, /coaxial-cable-assembly
EN
EN
Heavy-duty 10.3mm OD solid-PE bare copper construction
Reliable low VSWR performance for wireless base stations and test setups
Worldpeak RG213 pre-terminated cable assembly delivers reliable 50-ohm signal transmission for demanding communication installations. Built with a 10.3 mm outer diameter solid-PE cable and bare copper conductor, each Worldpeak RG213 pre-terminated cable assembly undergoes rigorous vector network analyzer verification before shipment. Supporting seven major connector families from DC to millimeter-wave frequencies, Worldpeak RG213 pre-terminated cable assembly provides consistent insertion loss and low VSWR. Ideal for wireless networks, test setups, and base stations, Worldpeak RG213 pre-terminated cable assembly ensures dependable performance for professional radio frequency engineering environments.
The Worldpeak RG213 pre-terminated cable assembly is engineered for professionals requiring robust signal integrity in mechanically demanding environments. Featuring a heavy-duty 10.3 mm outer diameter solid-PE dielectric core paired with a high-purity bare copper conductor, the Worldpeak RG213 pre-terminated cable assembly minimizes attenuation over long transmission runs.
Modern RF infrastructure demands precision wiring that withstands environmental stress while maintaining low signal distortion. Worldpeak utilizes advanced manufacturing procedures to attach connectors securely to the cable ends. Every Worldpeak RG213 pre-terminated cable assembly is processed on calibrated stripping and crimping stations, ensuring mechanical stability and optimal electrical contact across all operational bands.
Worldpeak RG213 pre-terminated cable assembly supports a wide selection of configurable connector interfaces to match diverse hardware portfolios:
N-Type Male / Female: Weather-resistant threaded design for outdoor antenna and base-station connections up to 11 GHz, plus panel-mount options for surge arrestors.
BNC Male / Female: Quick-connect bayonet interface suited for test equipment, laboratory interconnects, and oscilloscopes up to 4 GHz.
TNC Male / Female: Threaded BNC variant optimized for vibration-prone environments and aerospace equipment enclosures rated to 11 GHz.
SMA Male / Female: Compact threaded interface for high-density RF modules, PCB-mount systems, and test panels up to 18 GHz.
UHF (PL-259 / SO-239): Traditional screw-on connector suited for HF/VHF amateur radio systems and legacy equipment up to 300 MHz.
QMA Male / Female: Snap-on alternative to SMA designed for rapid cellular DAS and in-building wireless deployments.
4.3-10 Male / Female: Compact low-PIM connector engineered for modern small-cell base stations and distributed antenna systems up to 6 GHz.
Reliability in high-frequency environments starts with stringent quality control. Worldpeak subjects every Worldpeak RG213 pre-terminated cable assembly to comprehensive testing protocols.
VNA Verified Performance: Each individual Worldpeak RG213 pre-terminated cable assembly is tested using a vector network analyzer. Documentation including insertion loss and VSWR data is packaged with the shipment.
Consistent Electrical Properties: Factory-controlled termination eliminates human installation error, yielding repeatable phase and amplitude characteristics essential for multi-port system architectures.
Durability: The thick outer jacket protects the internal copper conductor from moisture, abrasion, and mechanical stress during routing through conduits and towers.
Impedance: 50 Ohms
Outer Diameter (OD): 10.3 mm
Conductor Material: Bare Copper
Dielectric Type: Solid-PE (Polyethylene)
Frequency Range: DC to 18 GHz (depending on selected connector family)
Length Tolerance: ±2 mm for assemblies under 1 meter; ±0.2% for assemblies exceeding 1 meter (tighter phase-matched tolerances available upon request)
Quality Verification: 100% VNA tested with included test data report
The versatility of the Worldpeak RG213 pre-terminated cable assembly makes it suitable for various engineering sectors:
Test & Measurement Interconnects: VNA-verified N-Type Male to N-Type Male assemblies provide documented insertion loss for repeatable laboratory calibration and testing.
RF System Jumpers: BNC Male to BNC Male factory-tested jumpers guarantee stable VSWR across operating frequency bands for system integration.
Mixed-Interface Adaptations: N-Type Male to TNC Male configurations link disparate hardware interfaces directly without requiring auxiliary adapters, reducing insertion loss points.
Wireless Infrastructure: Utilized in cellular base stations, remote radio units, in-building distributed antenna systems (DAS), and amateur radio setups.
Selecting between pre-terminated assemblies and field-terminated alternatives impacts project efficiency and long-term signal performance.
Field termination requires specialized crimping tools, precise stripping dimensions, and experienced technicians. Even with skilled labor, field-terminated cables rarely undergo rigorous electrical verification before deployment, leaving potential impedance mismatches undetected until system commissioning.
In contrast, the Worldpeak RG213 pre-terminated cable assembly is manufactured in controlled factory conditions. Calibrated machinery ensures exact connector seating, while vector network analyzer verification confirms electrical compliance prior to delivery. For professional deployments, utilizing a Worldpeak RG213 pre-terminated cable assembly saves installation labor time and ensures predictable insertion loss and VSWR. Field termination remains a practical fallback option primarily for emergency, one-off repairs.
Q: How do I choose between N-Type Male and BNC Male connectors?
A: N-Type Male offers a weather-resistant threaded design suited for outdoor antennas and base stations. BNC Male provides a quick-connect bayonet mechanism ideal for laboratory test equipment. Choose based on your operating frequency requirements, mechanical mounting constraints, and existing equipment ports.
Q: What is the standard length tolerance on custom assemblies?
A: Standard length tolerance is ±2 mm for assemblies under 1 meter and ±0.2% for longer assemblies. Tighter tolerances can be specified for phase-critical applications.
Q: What is the typical production lead time?
A: Standard-configuration assemblies ship within 5 to 10 working days. Large bulk orders or non-stock connector types may require 2 to 4 weeks.
Q: What installation precautions should be observed?
A: Use a calibrated torque wrench matching the connector series. Respect the cable's minimum bend radius to avoid core deformation. Keep connector interfaces capped when not in use and inspect for debris before mating.
Q: Are phase-matched sets and custom labeling available?
A: Yes. Phase-matched sets with documented electrical length data, serial-numbered labeling, and individual VNA test reports are standard customization options offered by Worldpeak.
Q: What information should I include in a quotation request?
A: Please provide the cable type, connector series and gender for both ends, total assembly length, required quantity, and any special requirements such as phase matching or custom test documentation.
Integrating the Worldpeak RG213 pre-terminated cable assembly into commercial and industrial projects streamlines procurement and accelerates deployment schedules. By eliminating on-site assembly and testing overhead, engineering teams reduce installation labor costs and minimize deployment risks.
Worldpeak supports scalable manufacturing to fulfill both prototype quantities and large-scale enterprise rollouts. Procurement teams seeking reliable coaxial interconnect solutions can request custom configurations tailored to specific mechanical and electrical parameters. Contact Worldpeak today to discuss project requirements, obtain detailed technical drawings, or request a quotation for your next RF communication deployment.
