EN
EN
Certifications: Certified by CE, RoHS, FC, and UL, meeting strict international quality standards.
Technical Advantages: Features an 83% Velocity of Propagation, >90 dB shielding effectiveness, up to 8 GHz frequency, and reduced attenuation profile.
Material & Process: Built with a 1.12 mm solid bare copper core, gas-injected foam PE dielectric, dual shielding (bonded aluminum tape + tinned copper braid), and a UV-resistant PE jacket.
The LMR200 coaxial cable manufactured by Zhenjiang Worldpeak Communication Co., Ltd. is a flexible, high-performance LMR200 low loss cable designed for high-frequency radio transmission. Featuring a 4.95 mm Black PE outer jacket, this 50 ohm LMR200 cable combines a 1.12 mm solid bare copper center conductor, a 2.95 mm gas-injected foam PE dielectric, and a dual-shield structure consisting of a 3.07 mm bonded aluminum tape and a 3.66 mm tinned copper braid. Delivering over 90 dB shielding effectiveness, the LMR200 RF cable provides low signal attenuation, exceptional mechanical stability, and ultimate link margin for antenna feeders, cellular DAS systems, and wireless jumpers.
Zhenjiang Worldpeak Communication Co., Ltd. engineers the LMR200 coaxial cable to bridge the performance space between compact jumper assemblies and heavier trunk lines. The LMR200 cable achieves superior attenuation characteristics without increasing physical dimensions beyond standard routing limits, offering a direct structural upgrade over traditional RG58 lines.
From an engineering perspective, conductor resistance directly impacts low-frequency transmission attenuation, while dielectric quality governs high-frequency performance. Zhenjiang Worldpeak Communication Co., Ltd. utilizes a 1.12 mm solid bare copper inner conductor in the LMR200 coaxial cable, reducing DC resistance to approximately 21.0 ohm/km. Combined with a gas-injected foam polyethylene dielectric offering an 83% Velocity of Propagation (VP), the LMR200 low loss cable significantly preserves signal integrity across demanding operating frequencies up to 8 GHz.
System Design and Installation Insight: While the enlarged 1.12 mm core and foam core structure optimize signal propagation, foam PE dielectrics exhibit lower crush resistance than solid PE equivalents. System installers working with 50 ohm LMR200 assemblies must maintain a minimum installation bend radius of 12.7 mm (50.8 mm for repeated bending) and avoid overtightening zip ties. Zhenjiang Worldpeak Communication Co., Ltd. recommends using calibrated cable clamps to eliminate dielectric deformation, preserving the 50-ohm characteristic impedance profile throughout the transmission path.
Reduced Attenuation Profile: The 1.12 mm solid copper core and foam PE dielectric of the LMR200 coaxial cable yield significantly lower insertion loss than conventional solid-PE cables.
High Velocity of Propagation (83% VP): Advanced dielectric geometry in the LMR200 low loss cable enables fast signal speeds, making it an ideal candidate for phase-critical RF systems.
Dual-Shielding Interference Control: Merging 100% bonded aluminum tape with a high-coverage tinned copper braid delivers >90 dB shielding effectiveness, isolating the LMR200 RF cable from dense electromagnetic noise.
Weatherproof PE Outer Jacket: Designed to withstand tough industrial conditions, the black PE jacket provides UV resistance and mechanical durability across a wide temperature spectrum (-40°C to +85°C).
Flexible 4.95 mm Footprint: The LMR200 cable maintains excellent bend characteristics, permitting smooth installation through tight enclosures, conduits, and equipment racks.
| Parameter | Specification | Engineering Notes |
| Impedance | 50 ohm | Standard 50 ohm LMR200 rating |
| Inner Conductor | 1.12 mm Solid Bare Copper | Low DC resistance (21.0 ohm/km) |
| Dielectric | 2.95 mm Foam PE | High 83% velocity of propagation |
| Outer Conductor 1 | 3.07 mm Bonded Aluminum Tape | 100% high-frequency coverage |
| Outer Conductor 2 | 3.66 mm Tinned Copper Braid | Structural strength & lower frequency shield |
| Outer Jacket | 4.95 mm Black PE | UV-stabilized, weather-resistant outer layer |
| Capacitance | 80.3 pF/m | Reduced capacitive loading |
| Shielding Effectiveness | >90 dB | Superior EMI protection |
| Max Frequency | 8 GHz | Broad frequency band capability |
| Attenuation @ 900 MHz | 31.5 dB/100m | Optimized for sub-GHz cellular/radio |
| Attenuation @ 2.4 GHz | 54.1 dB/100m | Ideal for Wi-Fi and Bluetooth deployment |
| Attenuation @ 5.8 GHz | 89.2 dB/100m | High-frequency wireless link suitability |
| Installation Bend Radius | 12.7 mm | Minimal routing clearance requirement |
| Certifications | CE, RoHS, FC, UL | Complies with international quality standards |
Procuring the LMR200 coaxial cable from Zhenjiang Worldpeak Communication Co., Ltd. supplies telecommunication contractors, device manufacturers, and network operators with a cost-effective, high-reliability interconnect platform.
Custom OEM Jacket Printing & Lengths: Zhenjiang Worldpeak Communication Co., Ltd. provides customized continuous printing on the LMR200 cable jacket, including customer logos, part numbers, and precise meter marks to simplify job-site inventory tracking.
Factory-Terminated RF Assemblies: To lower site labor costs, Zhenjiang Worldpeak Communication Co., Ltd. offers customized LMR200 low loss cable jumpers pre-terminated with N-Type, SMA, TNC, or BNC connectors, complete with factory VSWR testing.
Scalable Bulk Supply: Zhenjiang Worldpeak Communication Co., Ltd. ships 50 ohm LMR200 cable in standardized spools or custom packaging to support high-volume manufacturing and field infrastructure rollouts.
Base Station Antenna Feeders: Serving as primary or secondary RF interconnects where the LMR200 coaxial cable minimizes loss over medium feeder distances.
Cellular DAS Infrastructure: Connecting remote radio units (RRUs) to ceiling antennas in distributed antenna networks across commercial buildings.
Industrial Point-to-Point Wireless: Providing stable transmission lines for outdoor fixed wireless links operating in 900 MHz, 2.4 GHz, and 5.8 GHz bands.
OEM Test & Measurement Equipment: Delivering repeatable loss figures and physical flexibility for factory test stations using the LMR200 RF cable.
Q1: How does the LMR200 coaxial cable compare against RG58?
A: The LMR200 coaxial cable utilizes a larger 1.12 mm core, foam PE dielectric, and dual foil-and-braid shielding. This architecture provides significantly lower signal attenuation and better shielding effectiveness than standard RG58 lines while maintaining a similar 4.95 mm outer diameter.
Q2: Is the LMR200 low loss cable suitable for outdoor installations?
A: Yes. Zhenjiang Worldpeak Communication Co., Ltd. manufactures the LMR200 cable with a black PE outer jacket designed to withstand UV radiation and outdoor environmental stresses. Proper weatherproofing tape or boots must be applied over outdoor connector terminations.
Q3: What connectors are compatible with this 50 ohm LMR200 cable?
A: Industry-standard N-Type, SMA, TNC, and BNC connectors designed for 4.95 mm outer diameter foam cables are fully compatible with the LMR200 RF cable. Zhenjiang Worldpeak Communication Co., Ltd. can confirm pin and ferrule dimensions prior to order placement.
