EN
worldpeak-1-2-feeder-pre-terminated-cable-assembly, worldpeak-1-2-feeder-pre-terminated-cable-assembly, /coaxial-cable-assembly
EN
EN
100% VNA tested with individual verification reports
1/2-inch corrugated copper feeder construction with a 16.0 mm outer diameter
Engineered for cellular base-station jumpers, rooftop DAS, and wireless infrastructure
Guaranteed exceptional signal transmission and low VSWR performance
Worldpeak 1-2 feeder pre-terminated cable assembly is engineered for demanding wireless infrastructure, base-station jumpers, and rooftop Distributed Antenna Systems (DAS). Featuring a robust 1/2-inch corrugated copper feeder with a 16.0mm outer diameter, Worldpeak 1-2 feeder pre-terminated cable assembly delivers exceptional signal transmission from DC to millimeter-wave frequencies. Every Worldpeak 1-2 feeder pre-terminated cable assembly is factory-built on calibrated production lines and undergoes 100% vector network analyzer (VNA) testing. To ensure complete transparency and engineering confidence, Worldpeak ships each Worldpeak 1-2 feeder pre-terminated cable assembly with a comprehensive test data report detailing insertion loss and VSWR performance across the operating band.
Modern communication networks demand ultra-reliable RF interconnects that minimize signal degradation and withstand harsh outdoor conditions. Worldpeak 1-2 feeder pre-terminated cable assembly utilizes premium 1/2-inch corrugated copper feeder cable, providing excellent shielding effectiveness and mechanical flexibility. This core material ensures that Worldpeak 1-2 feeder pre-terminated cable assembly maintains low attenuation across high-frequency cellular, broadcast, and institutional radio spectrums.
Worldpeak supports a comprehensive range of connector interfaces for Worldpeak 1-2 feeder pre-terminated cable assembly, including 7/16 DIN Male/Female, N-Type Male/Female, 4.3-10 Male/Female, UHF (PL-259/SO-239), TNC Male/Female, and BNC Male/Female. Whether integrating cellular base stations, small-cell nodes, tower-top amplifiers, or legacy test equipment, Worldpeak 1-2 feeder pre-terminated cable assembly bridges diverse RF environments seamlessly. By integrating precision-machined connectors onto the 1/2-inch corrugated copper feeder, Worldpeak 1-2 feeder pre-terminated cable assembly eliminates field-termination errors, ensuring repeatable electrical performance from site to site.
Factory Pre-Terminated Design: Worldpeak 1-2 feeder pre-terminated cable assembly arrives ready for immediate deployment, eliminating the need for specialized stripping and crimping tools on site.
100% VNA Verified Quality: Every single Worldpeak 1-2 feeder pre-terminated cable assembly is tested on a vector network analyzer, with individual test reports provided for complete traceability.
Robust 1/2-Inch Corrugated Copper Construction: The resilient 1/2-inch corrugated copper feeder structure provides superior outer conductor integrity, mechanical stability, and high shielding effectiveness.
Extensive Connector Compatibility: Worldpeak 1-2 feeder pre-terminated cable assembly supports multiple connector families—such as 7/16 DIN, N-Type, and 4.3-10—accommodating diverse equipment ports and frequency bands.
Low Insertion Loss & VSWR: Optimized internal geometry ensures minimal signal reflection and power loss, maximizing system efficiency across cellular and microwave bands.
Weather-Resistant Engineering: Designed to endure harsh outdoor elements, Worldpeak 1-2 feeder pre-terminated cable assembly resists moisture, UV exposure, and thermal expansion stresses.
Cable Type: 1/2-inch corrugated copper feeder (1-2 feeder)
Outer Diameter (OD): 16.0 mm nominal
Impedance: 50 Ohms
Available Connector Interfaces:
7/16 DIN (Male / Female)
N-Type (Male / Female)
4.3-10 (Male / Female)
UHF / PL-259 / SO-239
TNC (Male / Female)
BNC (Male / Female)
Frequency Range: DC up to 11 GHz (depending on selected connector interface)
Testing Standard: 100% VNA tested for insertion loss and voltage standing wave ratio (VSWR)
Length Tolerance: ±2 mm for assemblies under 1 meter; ±0.2% for longer assemblies (tighter phase-matched tolerances available upon request)
Deploying RF infrastructure requires careful evaluation of installation methods. While field termination remains a fallback option for emergency repairs, it introduces significant variability. Field-terminated jumpers rely heavily on technician skill, manual tooling, and environmental conditions, often resulting in inconsistent insertion loss and elevated VSWR.
In contrast, Worldpeak 1-2 feeder pre-terminated cable assembly is produced in a controlled factory environment utilizing calibrated automated machinery. Each Worldpeak 1-2 feeder pre-terminated cable assembly undergoes rigorous electrical validation via vector network analysis before packaging. This factory-controlled process ensures uniform electrical length, minimized passive intermodulation (PIM), and consistent mechanical strength. Choosing Worldpeak 1-2 feeder pre-terminated cable assembly reduces deployment time, minimizes installation labor costs, and ensures long-term operational reliability in mission-critical networks.
Cellular Base-Station Jumpers: Interconnecting macro base-station cabinets to antenna arrays using Worldpeak 1-2 feeder pre-terminated cable assembly for reliable cellular coverage.
Rooftop DAS Runs: Deploying Worldpeak 1-2 feeder pre-terminated cable assembly across commercial rooftops to connect remote radio units and passive antennas in distributed antenna systems.
Test & Measurement Interconnects: Utilizing 7/16 DIN or N-Type variants of Worldpeak 1-2 feeder pre-terminated cable assembly for laboratory verification and antenna range testing.
Mixed-Interface Adaptations: Directly linking equipment ports of different types—such as 7/16 DIN Male to 4.3-10 Male—using Worldpeak 1-2 feeder pre-terminated cable assembly without intermediate adapter losses.
Investing in high-quality RF infrastructure components directly impacts network uptime, maintenance expenditure, and total cost of ownership. Worldpeak 1-2 feeder pre-terminated cable assembly delivers substantial commercial value by streamlining deployment timelines and mitigating signal failure risks. Network operators and system integrators utilizing Worldpeak 1-2 feeder pre-terminated cable assembly benefit from reduced on-site labor hours, as pre-built cables install faster and require no specialized termination equipment in the field. Furthermore, the inclusion of VNA test data with every Worldpeak 1-2 feeder pre-terminated cable assembly simplifies quality assurance audits and accelerates system commissioning. By choosing Worldpeak 1-2 feeder pre-terminated cable assembly, enterprises secure dependable, long-lasting RF connectivity that supports scalable network expansion.
Q: How do I choose between 7/16 DIN Male and N-Type Male for my Worldpeak 1-2 feeder pre-terminated cable assembly?
A: 7/16 DIN Male offers a large threaded interface well-suited for high-power base stations and broadcast transmitters up to 7.5 GHz. N-Type Male provides a compact, weather-resistant threaded connection ideal for outdoor antennas and general base-station setups up to 11 GHz. Select based on your equipment port specifications, power handling requirements, and operating frequency.
Q: What is the standard production lead time for a custom Worldpeak 1-2 feeder pre-terminated cable assembly?
A: Standard-configuration orders of Worldpeak 1-2 feeder pre-terminated cable assembly typically ship within 5 to 10 working days. Large volume requests, custom lengths, or non-stock connector combinations may require 2 to 4 weeks.
Q: Are phase-matched sets available for Worldpeak 1-2 feeder pre-terminated cable assembly?
A: Yes. Worldpeak offers custom phase-matched sets with documented electrical length data, serial-numbered labeling, and individual VNA test reports tailored for phase-critical OEM applications.
Q: What precautions should technicians observe when installing Worldpeak 1-2 feeder pre-terminated cable assembly?
A: Always use a calibrated torque wrench matching the specific connector series to prevent under-tightening or thread damage. Respect the minimum bend radius of the 1/2-inch corrugated copper feeder, keep protective caps on until final mating, and inspect interface surfaces for dust or moisture.
Q: What details must I provide when requesting a quotation for Worldpeak 1-2 feeder pre-terminated cable assembly?
A: Please specify the cable type, exact connector series and gender for both ends, total assembly length, required quantity, and any special options such as phase matching, custom labeling, or extended test documentation.
