EN
worldpeak-rg58-pre-terminated-cable-assembly, worldpeak-rg58-pre-terminated-cable-assembly, /coaxial-cable-assembly
EN
EN
Durable 5.0mm OD flexible CCS conductor construction
Reliable performance for lab test leads and short antenna jumpers
Worldpeak Communication proudly presents the high-performance Worldpeak RG58 Pre-Terminated Cable Assembly, engineered to meet the demanding interconnection requirements of modern radio frequency and communication systems. Built with a robust 5.0 mm outer diameter flexible cable and a reliable CCS conductor, this product serves as an exceptional solution for test leads, laboratory interconnects, and short antenna jumpers. Every single assembly produced by Worldpeak Communication is manufactured in controlled factory settings and undergoes rigorous testing utilizing advanced vector network analyzers (VNAs).
Worldpeak Communication ensures that each shipped unit arrives with documented test data, providing absolute transparency and dependable performance from DC up to millimeter-wave frequencies depending on the chosen connector interface. Designed to bridge the gap between signal source and equipment load without signal degradation, the Worldpeak RG58 Pre-Terminated Cable Assembly is a dependable choice for engineering professionals, technicians, and system integrators worldwide.
The Worldpeak RG58 Pre-Terminated Cable Assembly represents precision manufacturing in the realm of radio frequency engineering. As telecommunications and electronic testing environments grow increasingly complex, the demand for reliable signal transmission paths becomes paramount. Worldpeak Communication addresses this need by supplying factory-built coaxial jumpers that eliminate the variability and performance inconsistencies often associated with manual field termination.
The core structure of the Worldpeak RG58 Pre-Terminated Cable Assembly utilizes a durable 5.0mm outer diameter flexible cable layout, making it remarkably easy to route within dense equipment racks, crowded laboratory benches, and compact enclosures. Worldpeak Communication incorporates a quality CCS conductor within the structure, ensuring balanced signal characteristics and structural integrity.
To accommodate diverse deployment scenarios, Worldpeak Communication offers extensive compatibility across eight major connector families. Customers can choose from multiple gender and interface configurations, including SMA, N-Type, BNC, TNC, SMP, 2.92mm (K), MCX, and QMA. Whether connecting legacy laboratory equipment, modern cellular distributed antenna systems (DAS), or high-frequency test fixtures, Worldpeak Communication delivers customized configuration options that match exact system architecture requirements.
Comprehensive Connector Compatibility: Worldpeak Communication supports a wide array of standard and specialized interfaces, featuring SMA, N-Type, BNC, TNC, SMP, 2.92mm (K), MCX, and QMA options in both male and female genders.
Factory Precision Assembly: Every Worldpeak RG58 Pre-Terminated Cable Assembly is constructed on calibrated stripping and crimping stations to maintain uniform mechanical and electrical characteristics.
Documented Quality Assurance: Worldpeak Communication subjects units to 100% VNA testing, shipping each order alongside verified electrical performance reports for insertion loss and return loss.
Flexible Mechanical Profile: The 5.0mm outer diameter flexible design allows for smooth routing in tight spaces while respecting proper bend radius guidelines.
Versatile Interface Combinations: Worldpeak Communication accommodates mixed-interface assemblies, such as SMA Male to BNC Male jumpers, eliminating the need for separate signal adapters.
Customization Flexibility: Phase-matched sets, custom operational lengths, and specialized serial-numbered labeling are readily available for OEM and specialized project demands.
Cable Type: RG58 Coaxial Cable
Impedance: 50 Ohms (50Ω)
Outer Diameter (OD): 5.0 mm
Conductor Material: CCS (Copper-Clad Steel) Conductor
Frequency Range: DC up to millimeter-wave frequencies (dependent upon selected connector interface)
Connector Families Supported: SMA, N-Type, BNC, TNC, SMP, 2.92mm (K), MCX, QMA (Male and Female variants available)
Testing Standard: 100% Vector Network Analyzer (VNA) verified per unit with shipped test reports
Standard Length Tolerance: ±2 mm for assemblies under 1 meter; ±0.2% for assemblies exceeding 1 meter
Navigating high-frequency radio frequency environments requires a deep understanding of transmission line physics. When deploying coaxial interconnects, insertion loss and Voltage Standing Wave Ratio (VSWR) directly influence overall system efficiency. Worldpeak Communication designs its pre-terminated cable assemblies to mitigate impedance mismatches and reflections that typically degrade signal fidelity.
A critical engineering insight involves comparing factory pre-terminated solutions versus manual field termination. Field termination often relies on hand tools, subjective technician skill levels, and lacks systematic post-assembly verification. Conversely, Worldpeak Communication utilizes specialized automated stripping and crimping equipment within a controlled environment. This ensures optimal dielectric preservation, precise braid termination, and consistent center-conductor positioning.
Furthermore, because Worldpeak Communication verifies every single assembly using a vector network analyzer, engineers obtain tangible insertion loss and return loss data prior to installation. This practice eliminates trial-and-error troubleshooting during system integration, helping project managers maintain strict deployment schedules while preserving signal integrity across complex signal paths.
Test and Measurement Laboratories: Ideal for connecting signal generators, oscilloscopes, and spectrum analyzers using verified SMA or BNC interface assemblies supplied by Worldpeak Communication.
Outdoor Antenna and Base-Station Installations: Utilizing weather-resistant N-Type interfaces to link outdoor transponder arrays with indoor telecommunications hardware.
Cellular Distributed Antenna Systems (DAS): Deploying QMA and SMA interface jumpers for rapid in-building wireless connectivity and remote unit signal distribution.
Aerospace and Vehicular Equipment Enclosures: Leveraging threaded TNC and bulkhead configurations to withstand vibration-prone operational environments.
High-Density Radar and Phased-Array Systems: Utilizing push-on blind-mate SMP interfaces and precision 2.92mm (K) connections for millimeter-wave test setups.
Q: How do I choose between an SMA Male and an N-Type Male connector for my project?
A: SMA Male offers a compact, threaded interface designed for printed circuit board mounting and high-frequency, high-density RF modules. N-Type Male provides a larger, weather-resistant threaded connector well-suited for outdoor antenna masts and base-station connections. Worldpeak Communication recommends selecting based on your operating frequency ceiling, mechanical space constraints, and existing equipment port specifications.
Q: What is the standard length tolerance on custom Worldpeak RG58 Pre-Terminated Cable Assembly orders?
A: The standard length tolerance maintained by Worldpeak Communication is ±2 mm for all assemblies under 1 meter in length, and ±0.2% for longer assemblies. Tighter tolerances can be requested for phase-critical applications and specialized instrumentation setups.
Q: What is the typical production lead time for orders placed with Worldpeak Communication?
A: Standard-configuration cable assemblies typically ship within 5 to 10 working days. Large production quantities, specialized phase-matched sets, or non-stock connector interfaces may require 2 to 4 weeks for complete processing and testing.
Q: What installation precautions should technicians observe when handling these assemblies?
A: Worldpeak Communication advises using a calibrated torque wrench matched to the specific connector series during installation. Always respect the cable's minimum bend radius to prevent internal dielectric damage. Keep connector interfaces capped when not in active use, and thoroughly inspect mating surfaces for dust or contamination before connection.
Q: Are phase-matched sets and custom serial labeling available for OEM orders?
A: Yes. Worldpeak Communication offers phase-matched assembly sets complete with documented electrical length measurements, serial-numbered identification labels, and individual VNA test reports as part of standard OEM services.
Q: What information should I include when submitting a quotation request?
A: To receive a prompt and accurate quotation, please provide the desired cable type, the specific connector series and gender required at each end, the total assembly length, order quantity, and any special project requirements such as phase matching or custom documentation.
